Make a dynamic QR code you can edit after printing
This dynamic QR code generator makes codes that point to a short link in your account. Scan one and it opens your website. Change the website later and the printed code follows, with no reprint. Each scan is counted on the way, so you see how many times it was scanned, when, where and on what device.
Dynamic codes are made in your free account: the generator above shows what one adds, with a button to create the account. Its other types make static codes right on this page, with no account.
Already made a Website URL code in the generator above? After the download, a card can offer “Save it as an editable code, free”: your new free account then starts with the same link and design as a dynamic code. Print the code from your account, not the file you downloaded first, which holds your link itself and cannot be changed later.
New to dynamic codes? Static vs dynamic QR codes explains the difference and when each fits. Want a fixed link that needs no account? Use the free static URL QR code generator; it never expires.
What is free, and what each plan adds
- Free account: unlimited dynamic codes, and no card. They never pause: past 100 scans a month, a QRplify screen shows for 3 seconds before the link opens.
- 14-day Premium trial: every new account starts with it. When it ends you move to the Free plan with no charge, and every code keeps working and stays editable.
- Premium: unlimited dynamic codes and scans, 5 codes with no QRplify screen.
- Unlimited: unlimited dynamic codes and scans, and no QRplify screen.
- Static codes: unlimited on every plan, with no account.
Prices and every limit are on the pricing page.
Edit the destination after printing
When someone scans a dynamic URL QR code, it opens the URL you set. Because it is dynamic, you can update the destination later while keeping the same QR image on posters, packaging, menus, and flyers.
- Edit later without reprinting: Switch the destination after you already shipped or printed.
- Turn on or off (dynamic-only): Pause a QR code if a campaign ends, or if you need to stop traffic.
- Add a scan limit: Set an allowed scans limit so the QR can stop working after it is reached.
If you do not need edits later and you want a one-and-done print, use a static code instead. A static QR means any change requires a new QR and reprint. You can create that here: static URL QR code generator.
Track every scan
Every scan passes through your short link before it reaches your page, so your account records it: daily scans, hour of day, countries and cities, device brands, operating systems, browsers and language. Pick the last 15, 30 or 90 days or a custom range, and export the reports as CSV or PNG.
To see QR visits in your own analytics too, add UTM tags to the destination. How to track QR code scans shows how.
Tag your link for Google Analytics
Google builds the tagged link for you. Do this before you paste the destination into your account:
- Open the page in your browser, let it finish loading, and copy the address from the address bar.
- Open Google’s Campaign URL Builder and paste it as the website URL.
- Fill in campaign source (where the code is, such as
flyer), campaign medium (such asqr) and campaign name (such asspring). - Copy the campaign URL it builds and paste it as your code’s destination.
Google Analytics rules for tagged links
- Use the 3 main tags. Google says to always use
utm_source,utm_mediumandutm_campaign. Missing tags show as “(not set)” in reports. - Spell tags the same way every time. Values are case sensitive, so
flyerandFlyercount as 2 different sources. Google suggests lowercase as the standard. - 1 medium per channel. Google recommends 1
utm_mediumvalue for each channel, so pick 1 for your printed codes, such asqr, and keep it. - Where the visits show: in Google Analytics, open Acquisition, then Traffic acquisition, and look at session source, medium and campaign.
On a dynamic code the tags sit in the destination, so you can fix a misspelled tag in your account after printing. Google’s rules: Collect campaign data with custom URLs.
Chrome’s own QR code, or a dynamic one?
Chrome can make a QR code for the page you are on. On a computer, select More, then Cast, save, and share, then Create QR code. On Android, tap More, then Share, then QR Code. On iPhone and iPad, tap Share, then Create a QR Code. Use it for a quick share, and a dynamic code when the link may change or you want to count scans:
| Chrome’s code | A dynamic code | |
|---|---|---|
| What it opens | The page you made it on | The link you set |
| Change the link after printing | No | Yes, in your free account |
| Scan counts | No | Yes, by time, place and device |
| Account | None | A free account, no card |
| A screen before your page | No | On Free, past 100 scans a month, a QRplify screen for 3 seconds |
Chrome’s steps: Share tabs in Chrome. For a fixed link with your own colors and logo, pick Website URL in the generator above: that static code needs no account.
Dynamic codes for more than a link
Every dynamic type can be edited after printing and tracks its scans. Beyond a website link, your account makes:
- Contact details you can update: Dynamic vCard Plus, digital business card and CV or resume.
- Messages and payments you can change: dynamic email, dynamic SMS and dynamic UPI.
- A hosted page behind the code: bio links, website builder and product catalogue.
- Forms, reviews and payments: lead generation form, business review, Stripe booking and Stripe donation.
Best use cases for a dynamic URL QR code
- Printed marketing that changes: Billboards, brochures, business cards, and event signage where the landing page will evolve.
- Product packaging: Point to setup guides, warranty pages, or “what’s inside” pages that may change over time.
- Multi-location posters: Use bulk creation so each store has its own destination and tracking.
- Short-term offers: Run a promo for 2 weeks, then switch the destination to a new offer.
- Gated staff links: Add a simple PIN (dynamic-only) after creation for staff-only access to a page.
- Campaign attribution: Use UTM-tagged URLs so your analytics tools can separate traffic by channel and creative.
How to make a dynamic QR code
- Create your free account. No card needed. The generator above has the button.
- Enter your website address in the URL field. Use the full link, including
https://, so scanners open it correctly. - Check the destination by opening the link in your browser first. If it redirects, confirm it lands on the final page you want.
- Generate the QR code, then customize the look so it fits your brand and still scans reliably.
- Customize the design using options like solid, gradient, or image fill, eye colors, background toggle, patterns, shapes, stickers, and a logo.
- Download as PNG or SVG. Use PNG for web pages and screens, and SVG for print when you need sharp edges at any size.
Setup tips to prevent bad scans
- Use a clean destination URL: Avoid broken redirects and pages that require a login unless that is intended.
- Keep contrast high: Use a dark code on a light background. If you use gradients or image fill, test more than once.
- Do not crowd the QR: Leave whitespace around it. Tight layouts can reduce scan success.
- Use a sticker when it helps: A “Scan me” style sticker can increase scans, but keep the QR area clear and readable.
- Match format to use: Use SVG for print jobs and PNG for screens. If you print from a low-res PNG, the code may blur and fail.
- Be careful with short link changes after printing: If you change the short link after you already printed, older printed QR codes can break unless you replace them.
- Plan scan limits: If you set an allowed scans limit, the QR code can stop working once it is reached. Use this for limited releases, not for permanent signage.
Examples and templates you can reuse
Use the table below to plan destinations, naming, and tracking. If you paste multi-line templates into your own notes, keep line breaks using <br> so they stay readable.
| Use case | Destination URL template | Suggested QR label | Notes |
|---|---|---|---|
| Flyer campaign with tracking | https://example.com/offer?utm_source=flyer&utm_medium=qr&utm_campaign=spring |
Spring offer flyer |
Easy to compare performance by channel in analytics tools. |
| Multi-location posters | https://example.com/location?store_id=QRCODE_ID |
Store poster |
Use bulk creation so each QR has its own destination parameter. |
| Unique coupon per QR | https://example.com/coupon?code=QRCODE_SLUG |
Coupon poster |
Good for tracking which physical placement drove the scan. |
| Fast A or B landing page swaps | https://example.com/landing-a |
Campaign landing |
Start with A, then switch to B without reprinting the QR. |
| Private access flow (simple gate) | https://example.com/private |
Staff link |
Add a 5-digit PIN after creation (dynamic-only). It is a convenience gate, not high-security. |
FAQs
What does a dynamic QR code generator do?
It makes QR codes that hold a short link instead of your destination, so you can change where the printed code points and count its scans. The full comparison with static codes is in static vs dynamic QR codes.
Does Google have a free QR code generator?
Yes: Chrome makes a QR code for the page you are on. On a computer, select More, then Cast, save, and share, then Create QR code; on a phone, look under Share. Chrome’s help covers copying, downloading and sharing that code, not changing its link later or counting scans. For those, use a dynamic code.
Can I edit the destination after people already scanned it?
Yes. You can update the destination later. New scans will follow the updated destination.
Can I change the link on a QR code I already printed?
Only if it is a dynamic code. A dynamic code holds a short link, so you change the destination in your account and the printed code follows. A static code holds the link itself: if that link is a page on your own website, you can change that page, and otherwise you need a new code and a reprint. A dynamic code made with another service can only be changed in that service. The full answer is in Can you update a QR code link after printing?
What happens if I change the short link after printing?
Changing the short link after printing can break existing printed QR codes unless you replace them. If you already shipped or printed, keep the short link stable.
Can I turn a dynamic QR code into a static one?
Not the printed one: it holds its short link, and that link lives in your QRplify account. For new prints, pick Website URL in the generator above and make a static code with your final link. It needs no account and keeps working as long as your link does.
Can I password-protect or gate the QR code?
Yes, dynamic QR codes can use a PIN after creation. The PIN is 5 digits, and leaving it empty removes PIN protection.
Do dynamic URL QR codes include scan analytics?
Analytics are for dynamic QR codes. Typical views include daily scans, hour of day, operating systems, device brands, browsers, language, countries, and cities, with date ranges like last 15 days, last 30 days, last 90 days, or a custom range.
Can I export analytics reports?
Yes. Exports are available as CSV and PNG for dynamic QR analytics.
Why did my QR code stop working after a while?
One common cause is an allowed scans limit being reached. If you set a limit for a limited campaign, the QR can stop working once it hits that cap. For other causes, such as a deleted page or a plan that ended on another generator, see do QR codes expire.
PNG or SVG: which should I download?
Your account downloads both. Use SVG for print: it keeps crisp edges at any size, from a sticker to a poster. PNG is the one for web pages and screens. Either way, scan a test print with 2 phones before you print them all.
What are the Free, Premium, and Unlimited limits for dynamic QR codes?
Every plan includes unlimited dynamic QR codes and scans. On Free, past 100 scans a month, a QRplify screen shows for 3 seconds before the link opens. Premium keeps that screen off 5 codes, and Unlimited keeps it off every code.
Troubleshooting
- It scans but opens the wrong page: Check if your destination URL redirects. Update the destination to the final URL you want people to land on.
- Some phones do not scan it: Increase contrast, remove busy backgrounds, and avoid tiny sizes. Test in low light and bright light.
- It worked before and now it does not: Check if an allowed scans limit was reached, or if the QR was turned off.
- Printed codes fail but screen codes work: Print from the SVG, which stays sharp at any size. A small PNG stretched for print often blurs at the edges.
- After editing settings, older prints stopped working: If you changed the short link after printing, replace printed QR codes to avoid breaks.
- Destination page loads slowly: The QR may be fine. Test the destination URL on mobile data and improve the landing page speed.
Related
- Biolinks for sharing many links from one scan.
- Website Builder for creating a simple landing page before linking.
- Lead Generation Form for capturing contact details after scanning.
- File or PDF Upload for opening a document instead of a web page.
- Google Review for sending people directly to reviews.
Make your dynamic QR code
Create your free account, paste your website address and generate the code, then scan-test it with at least 2 different phones before you print anything. For print, download the SVG so the edges stay sharp on paper at any size.





















